Onewheel Pint Maghandle Replacement

Difficulty: Easy

Steps: 2

Time Required: 10 minutes

Introduction

For your safety, power off your Onewheel Pint prior to disassembly. This reduces the risk of electrical malfunctions and/or damage during the replacement process.

Note: Altering or damaging any component of your Onewheel Pint during disassembly/reassembly may render your existing warranty void or lead to refusal of non-warranty service at the discretion of Future Motion, Inc. (the creators of Onewheel).

Step 1 Remove the fender/delete screws and fender/delete

Remove all four (4) screws using a TP20 bit.
Note: Keep screws organized as they are easy to mix up and/or lose.
To remove the fender/delete, apply pressure to each side of it, near the axle carriers, and pull it up and away from the Onewheel™.

Step 2 Remove the maghandle screw and maghandle

Remove the one (1) screw using a 3 mm hex bit.