Onewheel GTS Bumper Replacement

Difficulty: Easy

Steps: 2

Time Required: 15 minutes

Introduction

If your Onewheel GTS bumpers are worn down, broken, or you’re just ready for a new color, use this guide to swap them out and keep your investment protected!

For your safety, power off your Onewheel GTS prior to disassembly. This reduces the risk of electrical malfunctions and/or damage during the replacement process.

Note: Altering or damaging any component of your Onewheel GTS during disassembly/reassembly may render your existing warranty void or lead to refusal of non-warranty service at the discretion of Future Motion, Inc. (the creators of Onewheel).

Step 1 Remove the bottom bumper screws

Remove all ten (10) screws using a TP25 bit.
Note: Keep screws organized as they are easy to mix up and/or lose.

Step 2 Remove the bumpers

To remove the front bumper, pull it toward the nose of the Onewheel GTS.